91嫩草国产线观看免费永久,人妻中文字幕中文专区

National Invention Patent

Three section telescopic arm

Active safety technology

Manual emergency return device

Three-axis inline oblique knife holder

Composite rotating circular saw blade holder

STC microcontroller integrated control system

Modular structure, lightweight design, rigorous attention to detail processing

The combination of orange and yellow tones highlights the leading quality of Equation Machinery

Using a 1.8-ton light truck for carrying, it can trim the median green fence, high branches and thick branches on the right side of the highway

Shrubs and weeds on the right slope, truly achieving multiple uses for one machine

Original composite rotating circular saw blade holder, using two 400mm circular saw bladesExcellent performance, capable of trimming 150mm thick branches and various dense hedgerows

Pioneering three-axis inline oblique knife holder, using three specially made 655mm bladesSeamless pruning adapted to various shrubs and weeds

Powered by a powerful gasoline engine from Briggs&Stratton or Kohler, with an electro-hydraulic hybrid drive，Strong power, meeting the requirements of various high load working conditions

The mainstream models are equipped with three synchronous telescopic arms, which can meet the requirements of mid-range belt trimming and short distance trimming

The requirement for long distance trimming on the right slope is that the maximum arm length is 5.7 meters

The exclusive side shear integrated machine is equipped with a swinging side shear arm and a knife holder.

It is possible to trim both the top and side surfaces of the median hedge at the same time.

Double efficiency and reduce road time by half.

Unique active safety design, the knife holder is in a non workingarea,and the main motor cannot be started

Eliminate the risk of misoperation and ensure job safety

Specially designed emergency return system, in case of power or hydraulic system failure.

Can manually reset the equipment quickly and evacuate the work site.

Equipped with an STC microcontroller integrated control system, operated using an 18 channel handheld.

remote control,Truly achieving effortless control.

Main configuration and technical parameter table

Components	Items	Parameters	Remarks
Generator set	Model	Equation Power BKT3200	Use Briggs & Stratton or Kohler engine
	Fuel type	Gasoline
	Rated power	≥15 kw
	Power factor	0.8
	Number of phases	Three phase
Body	Model	GLC Series 160X Special Body
Telescopic arm	Model	1830 type
	Structural type	Three-stage synchronous telescoping
	Maximum effective length	5172mm
	Minimum effective length	2917mm
	Expansion stroke	2260mm
Straight blade holder	Model	3*180 type
	Structural type	Single motor three-axis inline oblique placement
	Blade type	2*650mm+570mm straight blade or diamond blade
	Number of blades	3
	Main motor power	3kw
	Blade shaft speed	2880rpm
	Scanning width	1800mm
Hydraulic station	Model	160X-5P Enhanced
	Cooling method	Natural cooling
Electronic control system	Model	GLC130XDK type
	Type	Single-chip integrated control
	Operation mode	12-channel wireless remote control + wire control
Emergency Return	Model	GLC180YJ-2 type
Overall parameters	Maximum trimming height (reference index)	Flat cutting ≥4300mm/Vertical cutting ≥6000mm	When the height of the carriage plate is 900mm
	Minimumtrimming height (reference index)	Flat cutting-1436mm	When the height of the carriage plate is 900mm
	Trimming distance of main arm	5725mm	Starting from the equipment rotation center
	Trimming distance of main arm	1785mm	Starting from the equipment rotation center
	Elevation angle of boom at low position installation	+11°
	Depression angle of boom at low position installation	-36°
	Elevation angle of boom at high position installation	+36°
	Depression angle of boom at high position installation	-16°
	Swing angle of main blade holder	≥130°
	Outline dimensions	4636/4220mm x 1080mm x 1756mm
	Whole machine weight	1580kg